Home » Events » Particle Size Characterization 2016

Particle Size Characterization 2016

Date/Time
Date(s) - 2 November 2016 - 3 November 2016
All Day

Location
Delft Solids Solutions

Particle Size Characterization 2016


About

Why the course Particle Size Characterization?
Particle characterization concerns a wide range of materials and products: ranging from large molecules (proteins and polymers), micelles, micro-emulsions, viruses, droplets, latexes, fine dust particles, pigments, clay and minerals up to sand and gravel.

Powders and granular material are of key importance in industry. Approximately 80% of the industrial processes deals with such solid matter. In the chemical industry alone, half of the final products and 75% of the semi-finished products is in powder or granular form.
Delft Solids Solutions offers two courses devoted to particle characterization:

In the first 2-day course Particle Size Characterization the overall basic principles and definitions of particle size and particle shape are being discussed and particle size distribution techniques are being explained and compared. Pros and cons of the techniques are highlighted and common pitfalls in particle size characterization are interactively discussed. Accuracy, quality and quality control are separate topics that are dealt with together with selection of appropriate measurement techniques. A fully-equipped laboratory is located in the same premises as where the course is taught, which enables a perfect blend between theory and practice.

This course is in close relation to the 1-day course Porosity and Surface Area Characterization. Both courses are scheduled together in order to enable attendance of both courses in a series of 3 days.


For whom?
You are an operator, analyst, lab manager or technologist and are directly involved and/or interested in the characterization of particles. The course content is tailored to post-bachelor (Post-HBO) level, however the combination of theory and practical examples makes the course suitable for both experienced analysts at vocational level (MBO) or VAPRO-C as well as participants with academic background.

Content

Program
The central theme addressed in this course is how to define and characterize the size and shape of a particle or a set of particles.
Topics that are being discussed are:

  • Introduction solid matter and particles
  • Definitions particle size and shape
  • Sampling
  • Sample preparation
  • Sieving
  • Sedimentation
  • Electrical Sensing Zone (Coulter principle)
  • Forward light scattering (Laser Diffraction)
  • Dynamic light scattering
  • Microscopy and image analysis
  • Comparison of techniques
  • Quality, reference materials and standards

Methodology
The course is organized by and at the premises of Delft Solids Solutions, where also a fully equipped laboratory is available. In this laboratory the most important techniques in the area of particle size and shape characterization including sampling and sample pre-treatment equipment is available.

Practical demonstrations of the various types of equipment are used to alternate with the various lectures. Emphasis lies on the practical use and application of the techniques and how to translate results to the practical situations.


Duration
The course consists of two successive days of 8 hours each.

Objectives

End result
After attending this course you will have a good overview of the available
techniques for particle characterization. You know the underlying principles of the various methods, as well as the reliability of the measurement results. You know how to perform sampling and to interpret the results and judge the quality of it.

Certificate
Upon completion of the course you’ll receive a certificate of participation.

Other info

Location and dates
This course is held at the premises of Delft Solids Solutions,
Molenweer 2B, 2291 NR Wateringen, The Netherlands.
The next course will be held on 2 and 3 November 2016.


Financial investment
The investment in this 2-day course amounts to € 1.425,- ex. VAT.

In combination with the course Porosity and Surface Area Characterization
(3 successive days in total) the overall investment is € 1.995,- ex. VAT.

Contact

For more information on this course, you can reach us at +31 174 271 460.
Or send an email to info@solids-solutions.com

Subscribe


Brochure

Press here to download the brochure in pdf.